See Our T19 Transmission In Stock Now
T19 Information and parts is provided for the 4 Speed Transmission Both Ford and International used the Borg Warner T19 manual transmission. We can provide parts and rebuild kits; these kits are designed to be top of the line overhaul kits.
Looking for the right T19 Transmission today? Find your next T19 Transmission and other auto parts and accessories for sale on Ebay today. Purchase T19 Transmission and save!
- Borg-Warner T18 & T19 Transmissions The T18 is a renowned, heavy-duty truck transmission designed for and used in ½, 3/4 and 1+ ton trucks. The T18 was made by Borg-Warner Gear from 1965 to 1991. They are found in Ford, Jeep and IH trucks.
- Borg-Warner T19 Transmission For Sale. 1 Results Found This Page: 1 of 1. Units: Imperial (US) Metric. Currency: Sort Order: Show Closest First: Postal Code. Updated: Fri, Feb 26, 2021 11:23 AM BORG-WARNER T19. BORG-WARNER T19. For Sale Price: USD $350.00. Purchase today for USD $5.89/monthly.
Manual Transmission 4
Manual Transmission 4 Speed T 19 4x2 Fits 1985 Ford F350 Pickup 746342$150.00
T19 International Transmission
T19 International Transmission Case Borg Warner 13 09 065 905$250.00
T19 International Transmission
T19 International Transmission Case Borg Warner Freightliner 1301 066 907$150.00
T18 T19 4wd
T18 T19 4wd Housing Adapter Transfer Case To Transmission Ford W Gaskets$185.00
Manual Transmission 4
Manual Transmission 4 Speed T 19 2wd 7 5l Fits 83 87 Ford F250 Pickup 1154025$844.20
Manual Transmission 4
Manual Transmission 4 Speed T 19 4wd 8 460 Fits 85 87 Ford F250 Pickup 16151172$667.50
T19 International Transmission
T19 International Transmission Shift Cover Iron Forks Loaded 1309 097 903$150.00
Fits Ford T19
Fits Ford T19 T19d Transmission Overhaul Rebuild Kit 1980 On$147.53
Ford 4 Speed
Ford 4 Speed T19 Transmission Top Cover Small Parts Kit Sp19 50y W Steel Forks$31.00
Ford T18 And
Ford T18 And T19 Manual Transmission Front Bearing Retainer$39.50
T19 4 Speed
T19 4 Speed Transmission Paper Gasket Set Borg Warner T18$16.95
Ford T18 T19
Ford T18 T19 4 Speed Transmission 4wd Extension Housing$129.95
Borg Warner T18
T19 Transmission Gear Ratios
Borg Warner T18 T19 4 Speed Transmission 4x4 Adapter Housing For T1356 T18 7g$150.00
Borg Warner T18
Borg Warner T18 T19 4 Speed Transmission 4wd Bw1356 Adapter Housing T18 7g$110.00
Ford T18 T19
Ford T18 T19 4 Speed Transmission 2wd 4wd Gasket Seal Kit$24.95
T18 T19 Transmission
T18 T19 Transmission Countershaft Lay Shaft For 65 Ford Jeep International$38.88
Fits Ford T19
Fits Ford T19 T 19 Transmission Small Parts Rebuild Kit$38.80
1968 Up Ford
1968 Up Ford Jeep T18 T19 Transmission 3rd 4th Gear Synchronizer Assembly$99.95
T18 T19 Front
T18 T19 Front Bearing Retainer W Seal Gasket Ford Jeep 4 Speed Trans$49.25
T18 T19 Gasket
T18 T19 Gasket Set 4 Speed Transmission Ford Jeep International Borg Warner$23.35
T18 T19 Shift
T18 T19 Shift Fork Insert Pad Set 5 Pads Ford Jeep International$18.35
Fits Ford T19
Fits Ford T19 T 19 T18 T 18 Transmission Front Bearing Retainer$41.22
Front Throw Out
Front Throw Out Bearing Retainer Fits T18 T19 Transmission C5tz 7050h T18 6T19 Transmission Shifter
$30.00
Input Bearing T18
Input Bearing T18 T19 T98 T15 Ford Jeep 20mm Thick Ball Bearing$49.00
Borg Warner T19
Borg Warner T19 Manual Transmission Retainer 1301913 7190857$55.68
Ford Jeep T18
Ford Jeep T18 T19 4 Speed Transmission 2wd 4wd Throw Out Bearing Retainer$32.95
New Out Of
New Out Of Box Oem Ford Manual Transmission Clutch Release Bearing T 19 Manual$32.95
Reverse Shift Shoe
Reverse Shift Shoe Arm Fork Fits T19 Transmission T319 51 T19 51$12.50
Nos Oem Ford
Nos Oem Ford F1tz 7548 B Manual Transmission Clutch Release Bearing T 19 Manual$39.95
Used T19 Transmission
Used T19 Transmission Shift Cover Ford T19 148 With Switch$99.99
17 19 Nissan
17 19 Nissan Rogue Sport Auto Transmission Oil Cooler 21606 28x1a Oem Warranty$99.95
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 34 T Gears$92.49
19 Subaru Forester
19 Subaru Forester 2 5l Automatic Transmission Front Axle 18742 28321sj000$149.99
Hayden Transmission Oil
Hayden Transmission Oil Cooler For 2010 Gmc Canyon 3 7l 5 3l L5 V8 Auto Jl$60.43
2019 2020 Honda
2019 2020 Honda Passport Transmission Sub Harness 28220 5ey 0001$56.06
Sprintv25 2019 Wiper
Sprintv25 2019 Wiper Transmission 862347$127.95
2019 2020 Honda
2019 2020 Honda Passport Transmission 3 5 Awd$1,195.00
Vekta 5 T19
T19 Transmission Identification
Vekta 5 T19 22 Transmission Step Gears$25.00
Sprintv25 2019 Automatic
Sprintv25 2019 Automatic Transmission Oil Cooler 862308$134.95
Transmission Powertrain Control
Transmission Powertrain Control Module Sprinter 2019 881238 Id 2319001722$113.20
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 45 T Gears$92.49
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 44 T Gears$92.49
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 43 T Gears$92.49
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 42 T Gears$92.49
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 41 T Gears$92.49
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 38 T Gears$92.49
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 37 T Gears$92.49
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 36 T Gears$92.49
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 39 T Gears$92.49
T19 Transmission For Sale
Th350 Transmission Tail
Th350 Transmission Tail Housing Rebuild Kit W Speedometer Set 19 35 T Gears$92.49
| T-19 | |
|---|---|
| Type | Light tank |
| Place of origin | Soviet Union |
| Production history | |
| Designer | Ginzburg |
| Designed | 1929 |
| Produced | 1931 |
| No. built | Unknown |
| Specifications | |
| Mass | 7.20-8.10 tons |
| Length | 4.50 m |
| Width | 2.30 m |
| Height | 2.18 m |
| Crew | 3 |
Main armament | 37 mm gun |
| 2 x DT machine gun | |
| Engine | petrol 100 hp |
| Power/weight | 12.4 hp/t |
| Suspension | vertical springs |
Operational range | 190 km |
| Maximum speed | 27 km/h |
The T-19 was a Sovietlight tank design of the interwar years. Conceived as the mainstay of the new Soviet tank armies, it was a development of the T-18, ultimately based on the First World War-era French Renault FT. When ready for production in 1931, it was already obsolete; the project was terminated in favour of the Vickers based T-26.
Technical requirements[edit]
The T-19 was to become the mainstay of the mobile subdivisions of the USSR. The main requirements for the T-19 were:
- The ability to overcome the majority of field fortifications and wire entanglements without the aid of a “tail” and at maximum speed
- firepower should ensure superiority on the battlefield over all known combat vehicles of similar mass
- armor should protect its crew from rifle and machine-gun bullets at all distances, and from the fire of 37 mm guns beyond 1000 meters
According to the technical specifications, the tank's mass should not be more than 7.3 tons, with its maximum speed reaching 30 km/h on good soil with a 100 hp engine, an armament of at least a 40 mm main gun and two machine guns. Armor was to be 18–20 mm thick. Production of the T-19 was assigned to Semyon Alexandrovich Ginzburg.
The suspension of the T-19 became that of the French Renault NC. The T-19 was longer than the T-18, which improved its performance without “a tail”, it also decreased any longitudinal vibrations in the hull.
Armor[edit]
Experts often state that sloped armored plate (for increasing the protection of the tank), was first used on the T-34. That is not the case. The fact is that the designers could not exceed the permissible mass of the T-19, therefore they used a maximum thickness of 16 mm of armor. The shape of the hull would be critical in terms of protection. Successful construction of the T-19 depended on sloped armor, such as that proposed to M. I. Tarshinovym (who was already occupied in KB KHPZ with the production of the T-12/T-24), by Ginzburg, which made it more likely for bullets and projectiles to ricochet rather than penetrate.
Armament[edit]
The main armament of the T-19 was the 1930 37 mm semi-automatic gun, along with two Degtyaryov machine guns (DT), one located in the frontal portion of the hull near the radio operator; the other was in the turret. The mounting of the armament in the turret was provided in two versions - an independent installation of gun and machine gun, and a coupled installation as a unit.
The turret was the same as the T-18. The cannon could not be mass-produced for a time, and by the time it could, it was used on the BT series of tanks. The planned domestic six-cylinder air-cooled engine with a power of 100 hp was not produced; and the installation of the larger high-speed motor “Franklin” (95 hp) required reprocessing the construction of the gearbox, onboard transfers and even housing (engine it was more on the overall sizes). The T-19 required ball bearings, which at that time were not produced domestically, and had to be bought abroad. Price varied with the installation of chemical warfare equipment, flotation devices and other accessories.
Self containment[edit]
T -19 became the first tank, specially designed for the actions under the conditions of chemical warfare, for which it was equipped with plenum ventilation, producing 180 m3/h of filtered air, capable of neutralizing phosgene, hydrocyanic acid, chloropicrin, carbon monoxide and toxic smokes during 3-X of hours, after which crew could carry out combat mission in the gas masks, or, after replacing filter, to act without them already 3 hours.
Maneuverability[edit]
The T-19 was provided with floatation equipment powered using pneumatic or 'skeleton' floats, whose discharge could be produced without the output of crew from the machine. For the production were accepted the floating crafts of naval engineer B.S. Smirnov's system. There was initially the desire to equip tank with two detachable screws for propulsion through the water, but the T -19 was instead equipped with a special “water tractor”, which was created in 1931.
The T-19 did not have a “tail” and overcame entrenchments and narrow ditches to 2 meters due to the proper length. However, by the width 2,5 – 3 m two T -19 had to couple in the case of encounter with the antitank ditch, being lengthened doubly, for which in the front and rear extremities of machine it was provided for the installation of the special framework constructions (on the housing of tank there was on three openings in the nose and rear portions for the installation of the farms of cohesion).
For battlefield surveillance, the tank no longer used simple slots, known as “broneglaz”. Initially it was planned to use 'stroboscopic' instruments of the type used on the tank made by E.Grote (TG), but bulletproof glass of the “Simplex- triplex” type, with easily removable cartridge clips, was used instead.
Political decision[edit]
The decision of the Revolutionary Military Council session of July 17 to 18, 1929, placed before the defense industry a complex problem: to create a new military vehicle in a very short time- the “T-19 basic tracked tank”. GKB OAT was tasked with its design that autumn. The end-of-development date was January 15, 1930, but this proved to be optimistic. The numerous denunciations and complaints of the designers, and also the influence of the leaders of the RKKA (Workers' and Peasants' Red Army) heavily impeded the design process, and several partial prototypes were simply dismantled. In one of the complaints, an unknown “patriot” complained about the designer's desire to use '... helical gears in the transmission of the T-19 instead of spur-gear, which is the direct proof of their sabotage… “. These sorts of complaints came from the military, too; one of the commanders required that the basic tank would be equipped with '... elbow-shaped paws with the shafts through the walls to provide motion in snowy conditions and mountains… “. Nevertheless, despite the delays, inspection of the finished product took place on March 1, 1930.
Production[edit]
Production of first T-19 began in June 1931, and toward the end of August tanks were being delivered. However, the characteristics of the tank proved to be those below those planned, the weight was above the specifications (7,6-8 t), and the production was extremely complex.
All this was aggravated by the fact that stocked up in firm “Vickers” the 6-ton tank was quicker, and cheaper. So that in 1931 the works on T-19 were convoluted and all forces by urgent means were switched to the mastery of the series production of the tank “Vickers”, which was called in the USSR name T-26. They by that time completely gathered two tanks T-19 and additionally they had time to prepare housing from the welded and castings, and also number of accessories.
References[edit]
- M. Svirin and A. Beskurnikov. The First Soviet Tanks, in Armada Nº 1
External links[edit]